Vaudeville halloween

Me and my friends Jowan Sebastian, Tom Brimson and Liam Dennis wanted to organise a night that could double as a showcase for fun interactive things that we wanted to make. Halloween seemed like a good night for that.

With the help of Jack Williams, we put on the night at 5 below. My addition was to help create some sound effects buttons that were placed around the bar and fed through the main PA and help create a big LED filled crucifix.

The sound effects were made using a board based on Lady Ada’s Waveshield, similar to the board I made for my Mario Lamp. It consists of an Arduino shield that reads WAV files off an SD card and plays them out through a 3.5mm jack. There are 6 buttons that trigger 6 different sound effects. I made it using SMD components so I had to rejiggle the original design around a little in Eagle. Here is the board and the schematic.

This is the audio player, housed within a wooden box. 3 of the 6 buttons are mounted in the lid, for the DJ to operate.

The remaining 3 were placed inside dolls and attached around the bar.

As well as the sound box, we constructed the cross. We made MDF boxes to house the lights and covered them with tracing paper and perspex to diffuse the light.

Here is the crucifix assembled in the bar with an automatic RGB sequence.

As every halloween party needs, A spooky rupert the bear poster.